Is Legends Ultimate easy to assemble?

One of the most common questions for first-time buyers of the AtGames Legends Ultimate (ALU) is: “How difficult is it to assemble?” Let’s break it down.

📦 What You Get in the Box

The Legends Ultimate comes mostly pre-assembled. When you open the box, you’ll find:

  • Cabinet Sections: Usually two main pieces (top and bottom).

  • Controls: Joysticks, buttons, trackball, and spinners pre-installed or in modular pieces.

  • Accessories: Marquee light, side art panels, screws, and instruction manual.

  • Cables: Power cord, HDMI or other necessary connections.

This design reduces assembly time compared to building an arcade from scratch.

🛠️ Step-by-Step Assembly Overview

  1. Position the Cabinet Pieces

    • Most units split into two main sections. Carefully place the bottom on the floor and align the top section.

  2. Connect the Cables

    • Plug in the internal cables for the screen, controls, and lighting.

    • Pre-labeled connectors make this step straightforward.

  3. Secure with Screws

    • Use the provided screws to attach the top and bottom sections.

    • Side panels and marquee are typically screwed in afterward.

  4. Install Side Art and Marquee Light

    • Optional but recommended for a complete aesthetic.

  5. Plug In and Test

    • Power on the cabinet, check that all controls work, and ensure the display is functioning.

Estimated Assembly Time: 30–60 minutes for one person, slightly less with two people.

✅ Why It’s Easy to Assemble

  • Pre-Wired Controls: Reduces technical complexity.

  • Minimal Tools Required: Usually just a screwdriver.

  • Clear Instructions: Step-by-step manuals and online guides/videos.

  • Modular Design: Top and bottom sections simplify setup and transport.

⚠️ Tips for a Smooth Assembly

  • Have a Friend Help: The cabinet is large and heavy; two people make alignment easier.

  • Clear Space: Assemble in the room where it will stay to avoid moving it afterward.

  • Check Parts Before Assembly: Make sure all screws, cables, and panels are included.

  • Follow Instructions: AtGames manuals are detailed and include diagrams.

🎯 Final Verdict

The AtGames Legends Ultimate is very easy to assemble compared to traditional arcade cabinets. Most buyers can set it up in under an hour without professional help.

With pre-wired controls, modular design, and clear instructions, even first-time arcade owners will have no trouble getting their Legends Ultimate up and running.

Tip: Watch assembly videos online for visual guidance—this can save time and prevent mistakes.

🕹️ Step-by-Step Guide to Assembling the AtGames Legends Ultimate

Setting up your AtGames Legends Ultimate (ALU) is straightforward if you follow a few simple steps. This guide breaks it down for beginners, ensuring a smooth assembly process.

📦 Step 1: Unbox and Organize Parts

Before starting:

  • Carefully remove all parts from the box.

  • Identify the top section, bottom section, side panels, marquee light, and all screws/cables.

  • Lay them out on a clean floor with enough space for movement.

Tip: Keep the manual nearby for reference.

🛠️ Step 2: Position the Cabinet Sections

  • Place the bottom section in its intended spot.

  • Align the top section above it.

  • With help from a friend, carefully lower the top section onto the bottom, ensuring cable openings and screw holes line up.

🔌 Step 3: Connect Internal Cables

  • Plug in all pre-labeled connectors for:

    • Screen

    • Controls (joysticks, buttons, spinners, trackball)

    • Marquee lighting

  • Double-check each connection for secure fit.

🔩 Step 4: Secure the Sections

  • Use the provided screws to attach the top and bottom sections.

  • Tighten screws gradually—avoid over-tightening to prevent damage.

  • Attach side panels using the designated screws.

💡 Step 5: Install Marquee and Side Art

  • Slide in the marquee light at the top of the cabinet.

  • Install optional side art panels for a complete arcade aesthetic.

  • Ensure panels are flush and secured.

⚡ Step 6: Power On and Test

  • Plug in the power cord.

  • Turn on the cabinet and test:

    • Joysticks and buttons

    • Trackball and spinners

    • Display and marquee lights

  • Make sure all games load correctly.

⏱️ Estimated Assembly Time

  • Single Person: 45–60 minutes

  • Two People: 30–45 minutes

With two people, handling the cabinet sections and aligning screws is much easier.

✅ Tips for a Smooth Setup

  1. Prepare a Clean Space: Avoid scratches or damage during assembly.

  2. Use a Friend: Reduces risk of dropping or misaligning parts.

  3. Check Parts First: Make sure every screw and cable is accounted for.

  4. Follow Instructions: The manual includes diagrams for each step.

  5. Watch Video Tutorials: Visual guidance speeds up the process.

🎯 Final Thoughts

The AtGames Legends Ultimate is designed with ease of assembly in mind. Its modular design, pre-wired controls, and clear instructions make it perfect for first-time arcade owners.

Once assembled, you’ll have a fully functional home arcade cabinet ready to play 300+ built-in games and expandable options through BYOG™ and USB.

Pro Tip: After assembly, consider securing the cabinet to the wall if you have children or pets for extra safety.